Severe Simulation Test for run-in wear of all-alumina compared to alumina composite THR

I.C. Clarke; G. Pezzotti; D.D. Green; H. Shirasu; T. Donaldson; Ian Clarke

doi:10.1007/3-7985-1540-9_2

Severe Simulation Test for run-in wear of all-alumina compared to alumina composite THR

I.C. Clarke, G. Pezzotti, D.D. Green, H. Shirasu, T. Donaldson, Ian Clarke

Research output: Chapter in Book/Report/Conference proceeding › Chapter

Original language	American English
Title of host publication	Bioceramics and Alternative Bearings in Joint Arthroplasty
DOIs	https://doi.org/10.1007/3-7985-1540-9_2
State	Published - Jan 1 2005

Disciplines

Materials Science and Engineering
Structural Engineering

Access to Document

10.1007/3-7985-1540-9_2License: Unspecified

OpenUrl availability

Full text

Cite this

@inbook{437020764a9f4c5ab179394f290c2eab,

title = "Severe Simulation Test for run-in wear of all-alumina compared to alumina composite THR",

author = "I.C. Clarke and G. Pezzotti and D.D. Green and H. Shirasu and T. Donaldson and Ian Clarke",

note = "Part of the Ceramics in Orthopaedics book series (CIO) Four combinations of Biolox-forte and Biolox-delta implants (36mm diameter; 70μm diametral clearance) were subjected to a severe microseparation simulator wear model to 1.1 million cycles duration (run-in phase). With Biolox-forte THR, the stripe wear produced during run-in averaged 4.7 mm 3 per million cycles.",

year = "2005",

month = jan,

day = "1",

doi = "10.1007/3-7985-1540-9_2",

language = "American English",

booktitle = "Bioceramics and Alternative Bearings in Joint Arthroplasty",

}

TY - CHAP

T1 - Severe Simulation Test for run-in wear of all-alumina compared to alumina composite THR

AU - Clarke, I.C.

AU - Pezzotti, G.

AU - Green, D.D.

AU - Shirasu, H.

AU - Donaldson, T.

AU - Clarke, Ian

N1 - Part of the Ceramics in Orthopaedics book series (CIO) Four combinations of Biolox-forte and Biolox-delta implants (36mm diameter; 70μm diametral clearance) were subjected to a severe microseparation simulator wear model to 1.1 million cycles duration (run-in phase). With Biolox-forte THR, the stripe wear produced during run-in averaged 4.7 mm 3 per million cycles.

PY - 2005/1/1

Y1 - 2005/1/1

UR - https://link.springer.com/chapter/10.1007/3-7985-1540-9_2

U2 - 10.1007/3-7985-1540-9_2

DO - 10.1007/3-7985-1540-9_2

M3 - Chapter

BT - Bioceramics and Alternative Bearings in Joint Arthroplasty

ER -

Severe Simulation Test for run-in wear of all-alumina compared to alumina composite THR

Disciplines

Access to Document

OpenUrl availability

Other files and links

Cite this